EOT Crane Manufacturer in Gujarat

Gujarat shipped about 30% of India's exports in FY 2024–25, and it accounted for roughly 46% of the country's chemical exports. Behind those figures are overhead cranes that run two or three shifts a day in GIDC sheds, port yards and process plants. If you are shortlisting an EOT crane manufacturer in Gujarat, the questions that matter are practical: which crane type suits your duty cycle, which standards it follows, who inspects and services it, and how quickly an engineer can reach your site.

This page answers those questions for plant managers, maintenance heads and procurement teams. It covers the cranes Timeskrane supplies under the Times Krane brand, the technical ranges available, the inspection records a Gujarat factory needs to keep after the 2025 labour code changes, and how a typical project runs from site survey to commissioning.

About Timeskrane and the Times Krane Brand

Timeskrane (Times Industrial Engineers Pvt. Ltd.) has supplied industrial lifting equipment since 1988. The Times Krane brand, launched in 2012, covers EOT cranes, KBK light crane systems and chain hoists, and the company is an authorised partner of Demag Cranes & Components. Gujarat customers are supported from service bases in Ahmedabad and Surat, as part of a pan-India network across 14 cities.

You can review our certificates and company background before you send an enquiry.

EOT Cranes Supplied Across Gujarat

An Electric Overhead Travelling (EOT) crane is a bridge-type crane that runs on elevated runway rails and covers the full length and width of a bay. It is the standard material handling system in Gujarat's engineering shops, chemical plants and warehouses because it frees floor space and moves heavy loads in a controlled, repeatable way.

Crane type	Typical capacity	Where it fits in Gujarat	Details
Single girder EOT crane	1–20 ton	Engineering SMEs in Ahmedabad, textile plants in Surat, fabrication shops	Single girder cranes
Double girder EOT crane	10–100 ton and above	Chemical plants in Bharuch, port-side and heavy industry handling	Double girder cranes
Underslung crane	Up to 10 ton	Auto ancillary units and bays with low headroom	Underslung cranes
KBK light crane system	Light loads	Assembly lines and workstations in Rajkot and Vadodara	KBK systems
Jib crane	Light to medium loads	Machine loading and single-station lifting	Jib cranes
Portal crane	Outdoor yard duty	Port-side yards, material yards and open storage	Portal cranes

The right choice usually comes down to duty class, span and hook height rather than tonnage alone. Our guide on how to choose the right single girder crane for your facility walks through the sizing questions, and our double girder EOT crane manufacturer page covers heavier, longer-span work. If your loads cross a yard rather than a shed, read EOT crane vs gantry crane: which one does your factory actually need.

Technical Specifications of Times Krane EOT Cranes

Specification	Range / details
Lifting capacity	1 ton to 100 ton (custom on request)
Span	5 metres to 30 metres
Lift height	3 metres to 30 metres
Crane types	Single girder, double girder, underslung, KBK system
Duty class	M3 to M8 (light to extra heavy duty)
Power supply	415 V, 50 Hz, 3-phase AC
Control system	Pendant, radio remote or cabin control
Standards	Built to IS 3177:2020, IS 807:2006 and IS 4137:2015 (steel-works duty)
Hoist type	Wire rope hoist or chain hoist
Safety features	Overload protection, end buffers, limit switches, anti-collision
After-sales support	Pan-India AMC, spare parts, load testing, operator training

The design code for most overhead cranes in India is IS 3177:2020, which covers EOT and gantry cranes for all applications. Spans, duty classes or hazardous-area builds outside the standard range are quoted as custom EOT cranes. Send your span, capacity and duty hours through the contact page and we will return a datasheet.

Industries We Serve Across Gujarat

Each industrial cluster stresses a crane differently, so the specification starts with your plant, not a catalogue model.

• Chemicals and petrochemicals (Bharuch, Ankleshwar, Dahej): Bharuch district alone accounts for about 19% of India's chemical exports. Plants here often need flame-proof or Ex-rated hoists and spark-resistant components, built around the hazardous-area zone classification your safety team provides.
• Ports and logistics (Mundra, Kandla, Hazira): Double girder and portal cranes handle heavy cargo and project loads in open and semi-open yards. Mundra is among India's largest ports by cargo volume, and port-side duty cycles are demanding.
• Textiles and diamonds (Surat): Single girder cranes and electric hoists suit yarn, fabric and processing floors where loads are light and uptime matters. See our page for an EOT crane manufacturer in Surat.
• Engineering and auto ancillary (Ahmedabad, Rajkot, Sanand): Medium-duty and underslung cranes serve machine shops where headroom is tight and bays are shared.
• Pharmaceuticals (Ahmedabad, Vadodara): Plants usually ask for controlled-speed travel, clean finishes and low noise, and these points are agreed at the specification stage.
• Ceramics (Morbi): Tile plants move raw material and kiln-side loads in dusty bays, so duty class and component protection need careful selection.
• Steel, foundry and metal processing: Heavier duty classes apply. See our guides to EOT cranes for steel plants and heavy duty cranes for steel plants.
• Renewable energy (Kutch): Heavy-lift gantry and EOT configurations support wind turbine component handling.

Cities and Industrial Zones We Cover

Whichever estate you operate in, a crane manufacturer in Gujarat needs a service team within reach. We work across the zones below.

City	Industrial zones	Local page
Ahmedabad	Naroda GIDC, Odhav GIDC, Vatva GIDC, Changodar, Sanand	Crane manufacturer in Ahmedabad, Vatva, Ahmedabad, Gantry cranes in Ahmedabad
Surat	Sachin GIDC, Pandesara GIDC, Kim	EOT crane manufacturer in Surat
Vadodara	Waghodia GIDC, Makarpura GIDC, Nandesari	EOT crane manufacturer in Vadodara
Rajkot	Aji GIDC, Shapar-Veraval, Metoda	EOT crane manufacturer in Rajkot
Bharuch	Dahej, Ankleshwar GIDC, Jhagadia	Request a quote
Vapi	Vapi GIDC	EOT crane manufacturer in Vapi
Gandhinagar	Sector 25 GIDC	Request a quote
Morbi	Morbi ceramic industrial area	Request a quote

Plants on the Vapi–Mumbai corridor can also see our page for an EOT crane manufacturer in Maharashtra.

Compliance for Overhead Cranes in Gujarat After the OSH Code

What changed in 2025

Gujarat factories once followed Section 29 of the Factories Act, 1948 for lifting machines. That Act was repealed on 21 November 2025, when the Occupational Safety, Health and Working Conditions (OSH) Code, 2020 came into force. Gujarat has since notified its own OSH Rules, 2025, which address lifting appliances and lifting gear and require inspection, test and maintenance records to be kept available for inspectors.

The earlier law required a thorough examination of every lifting machine by a competent person at least once in every 12 months. Confirm the interval that applies to your crane under the current Gujarat rules with your competent person, because state rules and notifications continue to be updated.

Records to keep ready

• Examination reports signed by a competent person, for the crane and its lifting tackle (ropes, chains, hooks and slings)
• Load test certificate from commissioning and from each periodic test
• Safe working load marking and crane identification on the equipment
• Maintenance, repair and breakdown logs

How we support your inspection

Every supply includes design documents, load test certificates and compliance reports that your competent person and the factory inspectorate may ask for. Operator training and AMC enrolment are part of handover. For a fuller walkthrough, read our guide to EOT crane safety compliance in India.

This section is general guidance and not legal advice. Check specific requirements with your safety officer or the Directorate of Industrial Safety and Health, Gujarat.

Why Industries Choose Timeskrane as Their EOT Crane Manufacturer in Gujarat

Buyers tell us they compare quotes on price first and on support second. After commissioning, the order of importance reverses. These are the points that tend to decide whether a crane stays productive for twenty years.

• Timeskrane has worked in industrial lifting since 1988, so our engineers have seen how cranes behave after a decade in service, not only on commissioning day.
• One supplier can cover a 1-ton hoist on a monorail, a 50-ton double girder crane and a KBK system for an assembly line, which simplifies spares and service contracts.
• Our partnership with Demag Cranes & Components gives Gujarat plants access to globally proven hoist and crane technology.
• Hazardous-area, high-temperature and precision variants are built to order rather than adapted from standard models.
• Pan-India AMC and a spare parts network keep downtime short, with installation and breakdown support available across GIDC zones.

How We Supply and Commission an EOT Crane

1. Site survey and load analysis at your Ahmedabad, Surat, Vadodara or other Gujarat facility, covering span, headroom, runway condition and power supply.
2. Engineering design with span calculation and an IS code compliance review by the Times Krane technical team.
3. Manufacturing and inspection, with quality checks before dispatch.
4. Transport, erection and commissioning at your site, planned around your production schedule.
5. Operator training, load test certification and AMC enrolment at handover.

For typical timelines and costs, see our guide to the EOT crane installation process and cost in India.

How to Choose a Crane Manufacturer in Gujarat

Buyers comparing EOT crane manufacturers in Gujarat often receive quotes that look alike on paper, so the useful differences sit in the details. Ask each supplier the following:

• How did you arrive at the duty class for my application, and what hours per day does it assume?
• Will you check my runway and building structure, or only supply the crane?
• Which IS codes does the design follow, and which test certificates come with the crane?
• Where is your nearest service engineer, and what is the typical response time to my estate?
• Have you supplied cranes for my industry, such as a hazardous area or a high-temperature bay?
• What is the lead time and stocking policy for hoist, brake and control spares?

For a national comparison, read how to choose the right EOT crane manufacturer in India and our list of the top 10 EOT crane manufacturers in India.

What Affects EOT Crane Cost in Gujarat

Price depends on capacity, span, lift height, duty class, hoist type, control system, hazardous-area requirements and the condition of your existing runway. Indicatively, a 2-ton single girder system starts around ₹3.5 lakh, while a 50-ton double girder crane can exceed ₹45 lakh, before GST. A fixed quotation needs a site survey.

For capacity-wise figures, see our EOT crane price guide, the single girder EOT crane price page and the double girder EOT crane price page. The detailed EOT crane price in India 2026 cost guide breaks costs down by capacity.

AMC, Spare Parts and Service Across Gujarat

Our AMC programme covers preventive maintenance, breakdown response, spare parts and load testing for plants in Ahmedabad, Surat, Vadodara, Rajkot and Bharuch. Read what a contract includes in EOT crane AMC cost and what's included in 2026, and use our preventive maintenance checklist for EOT cranes between visits.

For day-to-day upkeep, see our EOT crane maintenance and EOT crane components pages. If you run Demag equipment, what a professional Demag crane service covers explains the scope of a service visit.

Get a Free EOT Crane Quote

Send your requirement to Timeskrane for a free site assessment and a customised quotation.

Sales: +91 98100 40296 | Services: +91 98109 01759 | Email: gauravmehta@timesmarketing.com | Website: timeskrane.com