English
Contact
Configure
Catalog
Times Krane is an EOT crane manufacturer and supplier building single and double girder cranes from 1 to 30 tons, spans up to 28 metres, to IS 3177 and IS 807 standards. We manufacture at our facility in Faridabad, Haryana, and deliver, install, and support EOT cranes across Mumbai, Navi Mumbai, and the wider Maharashtra industrial belt.
Every crane ships with full IS documentation and a load test certificate at 125% of rated SWL before it leaves the shop floor. If you're comparing EOT crane manufacturers in Mumbai right now, that documentation is the first thing worth asking any supplier for, before you ask about price.
Get a quote in one message.
Send us your span, load capacity, and duty cycle and our engineering team will respond with a real proposal, not a template price.
This is the question we hear most from Mumbai buyers searching for a double girder EOT cranes manufacturer, and the honest answer depends on your building's headroom and duty cycle more than on brand preference.
One bridge beam carries the hoist and trolley. It's lighter, needs less headroom, installs faster, and is the more economical choice for light to medium duty up to roughly 15 to 20 tons. Most workshop, warehouse, and light assembly operations in areas like Wadala and Lower Parel fall into this category.
Two parallel beams carry the hoist on top rather than underneath, which raises achievable hook height within the same building clearance and holds up better under heavier, continuous-duty cycles. If your facility runs multi-shift production, handles steel or heavy fabrication, or needs more lift height than a single girder crane can deliver in your available headroom, double girder is usually the right call. This is the more common configuration in larger manufacturing and logistics facilities across Navi Mumbai's MIDC zones and Taloja.
Not sure which fits your site? Send us your span and headroom and we'll tell you directly, rather than have you guess from a generic spec sheet. For a deeper technical comparison, see our dedicated double girder EOT crane manufacturer and single girder EOT crane manufacturer pages.
| Parameter | Typical Range |
|---|---|
| Safe Working Load (SWL) | 1 to 30 tons |
| Girder configuration | Single or double girder |
| Span | Up to 28 metres |
| Duty class | M3 to M7 depending on application |
| Hoist type | Wire rope hoist or electric chain hoist |
| Standards | IS 3177 (design), IS 807 (structural) |
| Control | Pendant, wireless remote, or cabin |
Beyond standard configurations, we also build underslung cranes for older Mumbai facilities, common in parts of Lower Parel and Andheri, where roof clearance doesn't allow a full top-running bridge crane. An underslung system hangs from the existing roof structure instead of needing separate runway beams, which often avoids expensive structural modification.
Wherever your facility sits in this belt, the decision on configuration comes down to the same two things: your building's actual headroom and your real duty cycle, not the theoretical maximum load you might occasionally lift.
Mumbai has no shortage of listings for EOT crane suppliers, but not every one of them actually fabricates what they sell. Before you commit, confirm:
EOT cranes from Times Krane are in use across several sectors throughout the Mumbai and Navi Mumbai belt:
Whatever your sector, the starting point is the same: an accurate picture of your load, span, and duty cycle, not a generic catalogue crane. For more on how EOT cranes compare to other configurations, see our EOT crane types guide, or check our overhead crane prices page for a breakdown of what drives cost by capacity.
An honest breakdown of what makes a crane genuinely heavy duty for steel plant use, covering duty classification, capacity, and safety features buyers often miss.
Finding the right steel plant crane manufacturer is perhaps the most important decision a procurement manager or plant owner will make. A poorly designed crane can increase both safety risks and downtime while excessively increasing maintenance costs.
If you run or manage a steel plant, you already know that an overhead crane for steel plant operations is not a luxury. It is the backbone of your material handling process. From moving billets and coils to shifting ladles of molten metal, the right crane decides how smoothly your production line runs.
Discover how EOT cranes support steel plant operations, from material handling to molten metal lifting. Learn about crane types, duty classes, safety features, and how to choose the right EOT crane for your steel plant.
An honest, researched look at the top 5 crane manufacturers for steel plants in India, covering ladle, grab bucket, and coil handling cranes.
A real, researched look at the top 10 crane manufacturers in North India, covering Delhi NCR, Punjab, Haryana, UP, and Rajasthan, with what actually sets each one apart.
If you are looking for a 10 ton overhead crane for your factory or warehouse, the primary question that arises in your mind is whether this capacity will cater to your daily operations or it will turn out to be a useless and bulky addition to your storage.
Looking for a reliable partner for your next industrial project?
